There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. The component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. When materials are fed into the feeder, they may be thrown up and move like Para curve, then fall down. The materials will move forward on the slope surface of the feeder.

 

Characteristics of Vibratory Feeder:

Smooth vibration,

Reliable operation,

Long service life,

Low noise,

Low power consumption,

Easy to adjust,

Easy to install,

Light weight,

Small volume,

Simple maintenance.

Model: GZD Series, ZSW Series

Technical Parameter of Vibrating Feeder:

Model	Max Feeding Size (mm)	Capacity (t/h)	Speed of Eccentric shaft (r/min)	Model of Motor	Power (kw)	Motor Speed (r/min)	No. of Motor	Install-ation Angle	Overall Dimensions (mm)(L×W×H)
GZD-180×80	300	30-80	---	YZO-20-6	2×1.5	970	2	0-10	2200×1100×800
GZD-300×90	500	40-100	---	YZO-30-6	2×2.2	970	2	0-10	3050×1430×1550
GZD-370×100	700	150-300	---	YZO-30-6	2×3.2	970	2	0-10	4250×1874×1130
GZD-430×120	800	200-400	---	YZO-30-6	2×5.5	970	2	0-10	4955×2206×1120
ZSW-380×96	500	90-100	500-714	Y180L-8	11	750	1	0	3882×2224×2121
ZSW-420×110	580	200-430	500-800	Y180L-6	15	970	1	0	4400×2050×1660
ZSW-490×96	500	120-240	500-800	Y180L-6	15	970	1	0	4957×2277×2150
ZSW-490×110	580	120-280	500-800	Y180L-6	15	970	1	0	4957×2400×2150
ZSW-490×130	720	200-320	500-800	Y180L-6	22	970	1	0	4957×2580×1870
ZSW-590×110	600	350	750	Y180L-6	22	970	1	0	6000×2500×2150
ZSW-600×130	750	400-560	500-800	Y180L-6	30	970	1	0	6082×2580×2083